NAMM 2015: Kemper Profiler V3 Released
Kempler GmbH have announced the next version of their popular Profiling technology.
Kemper GmbH today announced the next level of their acclaimed Profiling technology. The Profiler Firmware Version 3.0 now allows for profiling the guitar amps’ output independently from the connected guitar cabinet.
This opens up a whole new world of possibilities. Guitar players can profile their favorite amp sound and afterwards play thru a neutral power amp or the Profiler’s built in Class D amp into a guitar cabinet with the exact tone and behavior of their original tube amp. It also allows for freely combining “Direct Amp Profiles” with individually profiled cabs or imported impulse responses.
The result is a complete Profile that can run a physical guitar cabinet onstage for monitoring and simultaneously feed the virtual guitar-speaker sound to the main PA.
Furthermore the new Firmware supports the tight integration of the Profiler Remote control pedal, featuring the smoothest preset switching available, a 30 second Looper and an incredible new Rig Pack created in cooperation with producer legend Michael Wagener in Nashville, Michael Britt of Lonestar and with renowned Profile vendor The Amp Factory.
More than 50 new Factory Profiles
The new Rig Packs contain a selection of “Merged Profiles”, created with the new direct profiling technology. Kemper have spent some significant profiling time with studio legend Michael Wagener at his Nashville based Wireworld studios and have profiled everything from legendary preamps, amps and cabinets that have been used on numerous platinum selling records.
The Amp Factory collection consists of amps like Redplate, Clean Blackface, Driven Tweed, Fender Tweed Deluxe 58, Toneking Metro, Evil Robot, d/13 jtr37, Carr Roamer, Two Rock Bionyx and Marshall Jtm45.
Understanding Direct Profiling
The Kemper profiling technology has already had an incredible impact in the guitarists’ community for being able to capture the sound and feel of the classic guitar rig: Tube Amp/ Cabinet/ Microphone. These profiles are called “Studio Profiles”.
Now with Direct Profiling Kemper have gone even further and are able to capture the sound of a tube-amp including its power-amp separately from the cab – even when the cabinet load is active.
This works by tapping the sound exactly where it hits the speaker cabinet: The speaker output! As high voltage and high wattage are present, a dedicated DI is required. This specialized DI box is capable of scaling down the tube power amp voltage to a line-level signal, suitable for the Profiler, on a XLR output jack. The high-power signal is forwarded to the speaker cabinet through a different output jack.
What is the purpose of this when the sound of the speaker will not be captured in the Profile? The purpose is to capture the amp including the complex impedance behavior of the speaker.
This method captures those often discussed interactions between the power tube-amp and the connected speaker cabinet. When the Profile is played back through the Profiler’s built-in class D amp, or an external solid state power amp, it will recreate the same impedance situation to the connected speaker-cabinet. This is the key to making the built-in power-amp sound like a real tube power-amp.
The Direct Amp Profile can later be merged with the respective cabinet portion of a Studio Profile. Alternatively, Direct Amp Profiles can be paired with arbitrary cabinet impulse-responses, imported by our CabMaker 2.0 software. The result is a complete Profile that can run a physical guitar- cabinet onstage for monitoring, and simultaneously feed the virtual guitar-speaker sound to the main PA.
Pricing and availability:
The Kemper Profiler Firmware 3.0 is available from January 22nd, 2015 – free of charge for all registered owners of a Kemper Profiler.
Get the latest news, reviews and features to your inbox.Subscribe